Mounting Hardware is Included
This mount fits (including but not limited to):Firearms with a traditional Novak cut rear sight.
Please note, some manufacturers use licensed Novak rear sights. These are cut to the manufacturer’s spec and are NOT GENUINE/traditional/true Novak rear sight cuts. One of the most common manufacturers to do this is Taurus. Ruger also uses smaller Novak rear sights on their fixed sight revolvers. Our mount will NOT fit these applications since they are not a traditional/true Novak cut. We do not offer any options for those applications. Please refer toand/or call the manufacturer of your firearm to confirm that you have a GENUINE Novak cut, not a licensed Novak cut.
Please see our common 1911 dovetail chart if you are not sure which cut you have.
*For this mount to work with the Holosun 407K and 507K, the rear pins on the mount MUST be removed by milling or filing.
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Our products should be installed and checked by a qualified and competent gunsmith.
Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs
Modification of your firearm may nullify the manufacturer’s warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.604″Overall Width: .99″Mounting Hardware: (2) 6-32 Button Head ScrewsRed Dot Fitment:Vortex Defender-CCW 3 MOA Red Dot SightVortex Defender-CCW 6 MOA Red Dot SightBushnell RXS-100 Requires 6-32 x 3/8″ SHCSBushnell RXC-200 Requires 6-32 x 3/8″ SHCSBushnell RXU-200 Requires 6-32 x 3/8″ Flat Head ScrewsBushnell RXS-250 Requires 6-32 x 3/8″ SHCSCrimson Trace CTS-1500Holosun 407K*Holosun 507K*Holosun EPS-GR*Holosun EPS-RD*Holosun EPS-Carry-GR*Holosun EPS-Carry-RD*JpointLeupold Delta Point ProOptimaRedfield AcceleratorShield RMSShield RMScShield SMSSig Romeo Zero(*with Modification, the rear two locater pins on the plate must be filed off in order to allow the 407K/507K/EPS Models to fit.)
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.
This mount fits (including but not limited to):CZ 75 Bull ShadowSTI with fixed rear sightsSTI MarauderChristensen Arms 1911Colt Delta Elite 10mm (2016 and newer)Ruger SR 1911 (fixed rear sight)Sig Sauer NightmareCitadel 1911sSpringfield Armory 1911 EMP – 9mm / .40Springfield Armory 1911 EMP 4″ Lightweight Champion – 9mm / .40Springfield Armory 1911 EMP 4″ Conceald Carry Contour Model – 9mm / .40Springfield Armory 1911 Champion Operator Lightweight – .45Springfield Armory 1911 Range Officer Compact – 9mm / .45Springfield Armory 1911 Range Officer Champion – 9mm / .45Springfield Armory 1911 Range Officer Elite Compact – 9mm / .45Springfield Armory 1911 Range Officer Elite Champion – 9mm / .45Springfield Armory 1911 Range Officer Elite Operator – 9mm / .45Springfield Armory 1911 Loaded (Fixed Rear Sight) – .45Springfield Armory 1911 TRPRock Island TCM Rock Standard MS HC Combo – 22TCM/9MMTCMRock Island TAC Ultra FS Combo – 22TCM/9MMTCMRock Island Rock Ultra FS Combo – 22TCM/9MMTCMRock Island TAC Ultra FS HC Combo – 22TCM/9MMTCMRock Island TAC Ultra MS HC Combo – 22TCM/9MMROCKRock Island Ultra CS-LTCM Rock Standard FS HC Combo – 22TCM/9MMROCKRock Island Ultra CCORock Island TAC Ultra FS HC – 45 ACPRock Island TAC Standard FS – 45 ACPRock Island TAC Ultra FS HC – 9MMRock Island TAC Ultra FS – 45 ACPRock Island TAC Ultra CS – 45 ACPRock Island TAC Ultra CS – 9MMRock Island TAC Ultra FS – 10MMRock Island TAC Ultra MS – 10MMRock Island Rock Standard FS – 45ACPRock Island M1911-A1 FS TacRock Island Rock Ultra CS – 45 ACPRock Island Rock Ultra CS-LRock Island Rock Standard MS – 45ACPRock Island Rock Ultra CCORock Island Rock Standard FS – 9MMRock Isl
By purchasing EGW DeltaPoint Pro Novak Sight Mount from our online store, you are guaranteed to receive a high-quality item. We work with trusted brands to offer shooting and hunting enthusiasts, both amateur and professional, quality products at a reasonable price. Choosing to buy from us means opting for quality and practicality
The actual appearance of the product may differ from the image on the website. For additional information about payment, delivery, and product specifications, please contact us by phone or email.









